• <blockquote id="a6oys"></blockquote>
  • <tt id="a6oys"></tt>
  • Paul's Online Notes
    Paul's Online Notes
    Home / Calculus II / Vectors / Basic Concepts
    Show General Notice Show Mobile Notice Show All Notes Hide All Notes
    General Notice

    I apologize for the outage on the site yesterday and today. Lamar University is in Beaumont Texas and Hurricane Laura came through here and caused a brief power outage at Lamar. Things should be up and running at this point and (hopefully) will stay that way, at least until the next hurricane comes through here which seems to happen about once every 10-15 years. Note that I wouldn't be too suprised if there are brief outages over the next couple of days as they work to get everything back up and running properly. I apologize for the inconvienence.

    Paul
    August 27, 2020

    Mobile Notice
    You appear to be on a device with a "narrow" screen width (i.e. you are probably on a mobile phone). Due to the nature of the mathematics on this site it is best views in landscape mode. If your device is not in landscape mode many of the equations will run off the side of your device (should be able to scroll to see them) and some of the menu items will be cut off due to the narrow screen width.

    Section 5-1 : Basic Concepts

    Let’s start this section off with a quick discussion on what vectors are used for. Vectors are used to represent quantities that have both a magnitude and a direction. Good examples of quantities that can be represented by vectors are force and velocity. Both of these have a direction and a magnitude.

    Let’s consider force for a second. A force of say 5 Newtons that is applied in a particular direction can be applied at any point in space. In other words, the point where we apply the force does not change the force itself. Forces are independent of the point of application. To define a force all we need to know is the magnitude of the force and the direction that the force is applied in.

    The same idea holds more generally with vectors. Vectors only impart magnitude and direction. They don’t impart any information about where the quantity is applied. This is an important idea to always remember in the study of vectors.

    In a graphical sense vectors are represented by directed line segments. The length of the line segment is the magnitude of the vector and the direction of the line segment is the direction of the vector. However, because vectors don’t impart any information about where the quantity is applied any directed line segment with the same length and direction will represent the same vector.

    Consider the sketch below.

    This is a sketch of four directed line segments.  The first starts at (-3,-4) and ends at (-5,1).  The second starts at (0,0) and ends at (-2,5).  The third starts at (3,-6) and ends at (1,-1).  The fourth starts at (5,-1) and ends at (3,4).

    Each of the directed line segments in the sketch represents the same vector. In each case the vector starts at a specific point then moves 2 units to the left and 5 units up. The notation that we’ll use for this vector is,

    \[\vec v = \left\langle { - 2,5} \right\rangle \]

    and each of the directed line segments in the sketch are called representations of the vector.

    Be careful to distinguish vector notation, \(\left\langle { - 2,5} \right\rangle \), from the notation we use to represent coordinates of points, \(\left( { - 2,5} \right)\). The vector denotes a magnitude and a direction of a quantity while the point denotes a location in space. So don’t mix the notations up!

    A representation of the vector \(\vec v = \left\langle {{a_1},{a_2}} \right\rangle \) in two dimensional space is any directed line segment, \(\overrightarrow {AB} \), from the point \(A = \left( {x,y} \right)\) to the point \(B = \left( {x + {a_1},y + {a_2}} \right)\). Likewise a representation of the vector \(\vec v = \left\langle {{a_1},{a_2},{a_3}} \right\rangle \) in three dimensional space is any directed line segment, \(\overrightarrow {AB} \), from the point \(A = \left( {x,y,z} \right)\) to the point \(B = \left( {x + {a_1},y + {a_2},z + {a_3}} \right)\).

    Note that there is very little difference between the two dimensional and three dimensional formulas above. To get from the three dimensional formula to the two dimensional formula all we did is take out the third component/coordinate. Because of this most of the formulas here are given only in their three dimensional version. If we need them in their two dimensional form we can easily modify the three dimensional form.

    There is one representation of a vector that is special in some way. The representation of the vector \(\vec v = \left\langle {{a_1},{a_2},{a_3}} \right\rangle \) that starts at the point \(A = \left( {0,0,0} \right)\) and ends at the point \(B = \left( {{a_1},{a_2},{a_3}} \right)\) is called the position vector of the point \(\left( {{a_1},{a_2},{a_3}} \right)\). So, when we talk about position vectors we are specifying the initial and final point of the vector.

    Position vectors are useful if we ever need to represent a point as a vector. As we’ll see there are times in which we definitely are going to want to represent points as vectors. In fact, we’re going to run into topics that can only be done if we represent points as vectors.

    Next, we need to discuss briefly how to generate a vector given the initial and final points of the representation. Given the two points \(A = \left( {{a_1},{a_2},{a_3}} \right)\) and \(B = \left( {{b_1},{b_2},{b_3}} \right)\) the vector with the representation \(\overrightarrow {AB} \) is,

    \[\vec v = \left\langle {{b_1} - {a_1},{b_2} - {a_2},{b_3} - {a_3}} \right\rangle \]

    Note that we have to be very careful with direction here. The vector above is the vector that starts at \(A\) and ends at \(B\). The vector that starts at \(B\) and ends at \(A\), i.e. with representation \(\overrightarrow {BA} \) is,

    \[\vec w = \left\langle {{a_1} - {b_1},{a_2} - {b_2},{a_3} - {b_3}} \right\rangle \]

    These two vectors are different and so we do need to always pay attention to what point is the starting point and what point is the ending point. When determining the vector between two points we always subtract the initial point from the terminal point.

    Example 1 Give the vector for each of the following.
    1. The vector from \(\left( {2, - 7,0} \right)\) to \(\left( {1, - 3, - 5} \right)\).
    2. The vector from \(\left( {1, - 3, - 5} \right)\) to\(\left( {2, - 7,0} \right)\).
    3. The position vector for \(\left( { - 90,4} \right)\)
    Show All Solutions Hide All Solutions
    a The vector from \(\left( {2, - 7,0} \right)\) to \(\left( {1, - 3, - 5} \right)\). Show Solution

    Remember that to construct this vector we subtract coordinates of the starting point from the ending point.

    \[\left\langle {1 - 2, - 3 - \left( { - 7} \right), - 5 - 0} \right\rangle = \left\langle { - 1,4, - 5} \right\rangle \]

    b The vector from \(\left( {1, - 3, - 5} \right)\) to\(\left( {2, - 7,0} \right)\). Show Solution

    Same thing here.

    \[\left\langle {2 - 1, - 7 - \left( { - 3} \right),0 - \left( { - 5} \right)} \right\rangle = \left\langle {1, - 4,5} \right\rangle \]

    Notice that the only difference between the first two is the signs are all opposite. This difference is important as it is this difference that tells us that the two vectors point in opposite directions.


    c The position vector for \(\left( { - 90,4} \right)\) Show Solution

    Not much to this one other than acknowledging that the position vector of a point is nothing more than a vector with the point’s coordinates as its components.

    \[\left\langle { - 90,4} \right\rangle \]

    We now need to start discussing some of the basic concepts that we will run into on occasion.

    Magnitude

    The magnitude, or length, of the vector \(\vec v = \left\langle {{a_1},{a_2},{a_3}} \right\rangle \) is given by,

    \[\left\| {\overline{v}} \right\| = \sqrt {a_1^2 + a_2^2 + a_3^2} \]
    Example 2 Determine the magnitude of each of the following vectors.
    1. \(\vec a = \left\langle {3, - 5,10} \right\rangle \)
    2. \(\displaystyle \vec u = \left\langle {\frac{1}{{\sqrt 5 }}, - \frac{2}{{\sqrt 5 }}} \right\rangle \)
    3. \(\vec w = \left\langle {0,0} \right\rangle \)
    4. \(\vec i = \left\langle {1,0,0} \right\rangle \)
    Show Solution

    There isn’t too much to these other than plug into the formula.

    a \(\left\| {\vec a} \right\| = \sqrt {9 + 25 + 100} = \sqrt {134} \)

    b \(\displaystyle \left\| {\vec u} \right\| = \sqrt {\frac{1}{5} + \frac{4}{5}} = \sqrt 1 = 1\)

    c \(\left\| {\vec w} \right\| = \sqrt {0 + 0} = 0\)

    d \(\left\| {\vec i} \right\| = \sqrt {1 + 0 + 0} = 1\)

    We also have the following fact about the magnitude.

    \[{\mbox{If }}\left\| {\vec a} \right\| = 0{\mbox{ then }}\vec a = \vec 0\]

    This should make sense. Because we square all the components the only way we can get zero out of the formula was for the components to be zero in the first place.

    Unit Vector

    Any vector with magnitude of 1, i.e. \(\left\| {\vec u} \right\| = 1\), is called a unit vector.

    Example 3 Which of the vectors from Example 2 are unit vectors?
    Show Solution

    Both the second and fourth vectors had a length of 1 and so they are the only unit vectors from the first example.

    Zero Vector

    The vector \(\vec w = \left\langle {0,0} \right\rangle \) that we saw in the first example is called a zero vector since its components are all zero. Zero vectors are often denoted by \(\vec 0\). Be careful to distinguish 0 (the number) from \(\vec 0\) (the vector). The number 0 denotes the origin in space, while the vector \(\vec 0\) denotes a vector that has no magnitude or direction.

    Standard Basis Vectors

    The fourth vector from the second example, \(\vec i = \left\langle {1,0,0} \right\rangle \), is called a standard basis vector. In three dimensional space there are three standard basis vectors,

    \[\vec i = \left\langle {1,0,0} \right\rangle \hspace{0.25in}\vec j = \left\langle {0,1,0} \right\rangle \hspace{0.25in}\vec k = \left\langle {0,0,1} \right\rangle \]

    In two dimensional space there are two standard basis vectors,

    \[\vec i = \left\langle {1,0} \right\rangle \hspace{0.25in}\vec j = \left\langle {0,1} \right\rangle \]

    Note that standard basis vectors are also unit vectors.

    Warning

    We are pretty much done with this section however, before proceeding to the next section we should point out that vectors are not restricted to two dimensional or three dimensional space. Vectors can exist in general n-dimensional space. The general notation for a n-dimensional vector is,

    \[\vec v = \left\langle {{a_1},{a_2},{a_3}, \ldots ,{a_n}} \right\rangle \]

    and each of the \({a_i}\)’s are called components of the vector.

    Because we will be working almost exclusively with two and three dimensional vectors in this course most of the formulas will be given for the two and/or three dimensional cases. However, most of the concepts/formulas will work with general vectors and the formulas are easily (and naturally) modified for general n-dimensional vectors. Also, because it is easier to visualize things in two dimensions most of the figures related to vectors will be two dimensional figures.

    So, we need to be careful to not get too locked into the two or three dimensional cases from our discussions in this chapter. We will be working in these dimensions either because it’s easier to visualize the situation or because physical restrictions of the problems will enforce a dimension upon us.

    亚洲欧美中文日韩视频 - 视频 - 在线观看 - 影视资讯 - av网 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>